Scope of delivery
Heat Recovery System 90°C including :
Specific double cooler 2nd and 3rd stage. Special design for 1st stage intercooler.
Internally adapted water circuit.
The compressor runs with a smaller water pump with frequency inverter,”VSD”.
The compressor runs with a smaller separate water cooling system.
External Heat Exchanger Kit for easy connection to the customer system.
Features & benefits
Features based on L 5 model /200 kW.
- Temperature :
30-35°C water in – between 85-90°c water out. 
- Power : heat recovered @ 40 bar on load is ca.160 kW = ca.80% of the shaft power.
- Water : Available quantity of water for Heat Recovery is ca. 2 m³/hour water flow for L5 model.
- Due to HR a smaller separate cooling system is used for the complete compressor system.
One year operation, 6000 running hours @ 0.05 € / kW Heat = 48.000 € savings.
Scope of delivery
Heat Recovery System 40°C including :
External skid Heat Recovery System 40°C with stainless steel plate exchanger.
Stainless steel heat exchanger, dismountable, with connecting flanges & water piping.
500 l water receiver , vertical with accessories mounted on the skid.
- Ready to use system, fully connected with explansion vessel and valves, temp. gauges…
- Skid with plug and play connecting points , supplied loose with adaptable feet for easy connections to the water circuit of the customer.
Features & benefits
Features based on 200 kW. Either CE or L series
- Temperature : water in : 29°C, water out available for HR 39°C
- Power : heat recovered @ 40 bar on load is ca.160 kW = ca.80% of the shaft power.
- Water : Available quantity of water for Heat Recovery Max 40°C Delta temp. 10°C = 15.2 m³/h.
